Доброго всем дня!
Понадобилось прицепить вынос IP, корзина WM (ACT10).
Создал шелф 5 на первое место прописал INTIPB.
В центральном шелфе есть две INTIPA с которыми без проблем работают IP MG и IP аппараты.
но вот вынос на INTIPB никак не хочет цепляться, с проца пингуется
в СОМ порту при загрузке INTIPB видно следующее
00000016-00001A62: ConfigIP : Ethernet check success.........
00000017-000020AB: ConfigIP : Default Router alive
00000018-000020AB: LANPBX : Download of the file 'lanpbx.cfg' fr om server 10.185.11.71
.
00000019-00002163: LANPBX : DOWNLOAD lanpbx.cfg OK
0000001A-00002163: LANPBX : SEARCH OF THE GOOD CPU FROM LANPBX.CFG
0000001B-00002163: BININTIP : Download of the binary [Current size lim it : 1024KBytes]
0000001C-00002163: SEARCH FOR CPU : Try to start with cpu 10.185.11.71 (tftp client number 0 try to download file 'binintip')
0000001D-00002169: SEARCH FOR CPU : cpu 10.185.11.71 deny INTIP board (tftp server return error = 32002)
0000001E-00002169: : "No declared equipment for INTIP A / INTIP B StandBy"
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
INTIP fails to start
Event : CPU search step failed
Diagnosis :
- INTIP board failed to locate the main CPU.
Checklist :
- Check lanpbx.cfg file content
- Check that Ethernet address and Crystal number are declared in database of the CPU
- Check that the CPU can ping INTIP board when this message is just displayed
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
0000001F-00002169: SEARCH FOR CPU : We have not found the cpu (tftp server not found)
подскажите что это за файл 'binintip'? где он должен лежать?
подозреваю что в pbxbuild чего то не хватает, но интуитивно не смог понять.
lanpbxbuild
01. IP download: 10.185.11.71
IP download RD: 10.185.11.71
IP CPU 1: 10.185.11.73
IP CPU 2: 10.185.11.70
станция сетевая, двух процессорная R7.1 ACT
Понадобилось прицепить вынос IP, корзина WM (ACT10).
Создал шелф 5 на первое место прописал INTIPB.
В центральном шелфе есть две INTIPA с которыми без проблем работают IP MG и IP аппараты.
но вот вынос на INTIPB никак не хочет цепляться, с проца пингуется
в СОМ порту при загрузке INTIPB видно следующее
00000016-00001A62: ConfigIP : Ethernet check success.........
00000017-000020AB: ConfigIP : Default Router alive
00000018-000020AB: LANPBX : Download of the file 'lanpbx.cfg' fr om server 10.185.11.71
.
00000019-00002163: LANPBX : DOWNLOAD lanpbx.cfg OK
0000001A-00002163: LANPBX : SEARCH OF THE GOOD CPU FROM LANPBX.CFG
0000001B-00002163: BININTIP : Download of the binary [Current size lim it : 1024KBytes]
0000001C-00002163: SEARCH FOR CPU : Try to start with cpu 10.185.11.71 (tftp client number 0 try to download file 'binintip')
0000001D-00002169: SEARCH FOR CPU : cpu 10.185.11.71 deny INTIP board (tftp server return error = 32002)
0000001E-00002169: : "No declared equipment for INTIP A / INTIP B StandBy"
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
INTIP fails to start
Event : CPU search step failed
Diagnosis :
- INTIP board failed to locate the main CPU.
Checklist :
- Check lanpbx.cfg file content
- Check that Ethernet address and Crystal number are declared in database of the CPU
- Check that the CPU can ping INTIP board when this message is just displayed
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
0000001F-00002169: SEARCH FOR CPU : We have not found the cpu (tftp server not found)
подскажите что это за файл 'binintip'? где он должен лежать?
подозреваю что в pbxbuild чего то не хватает, но интуитивно не смог понять.
lanpbxbuild
01. IP download: 10.185.11.71
IP download RD: 10.185.11.71
IP CPU 1: 10.185.11.73
IP CPU 2: 10.185.11.70
станция сетевая, двух процессорная R7.1 ACT