1. Прописать платы на соответствующих платоместах. 2. Прописать группы Т2 3. Группе назначить доступ, то есть привязать к прописанной ранее карте. 4. Сконфигурировать NPD 5. Прописать префикс выхода по транковой группе 6. Вставить шланг в плату, проверить командой trkstat N группы состояние каналов, если F, то с физикой все ок, если HS, значит сконфигурировали неверно. 7. Пишу по памяти, наверняка что-то забыл. 8. ??????? 9. PROFIT!
Прочитать про все это можно в документации System documentation/Public network
Возник такой интересный вопрос, ответ на который пока не могу получить в документации и справке по системе.
Допустим у меня есть два пользователя в марте я добавил их в каталог компании (каталог в OV так же начинается с компании), в апреле я сделал отдел1 и поместил в него пользователя1 в мае я сделал отдел2 и поместил в него пользователя2, потом сделал перерасчет в учет/траф./VOIP, далее я создаю в конструкторе отчет и делаю два отчета, первый отчет за апрель, второй отчет за май по звонкам на межгород.
На выходе получаю следующую ситуацию, в майском отчете я вижу звонки по отделу1 и отделу2, а в апрельском только по отделу1, при условии что пользователи 1 и 2 звонили по межгороду и в апреле и в мае.
Отсюда вопрос, можно ли в OV сделать так, что бы созданные в каталоге, в более позднее время, отделы учитывались в более ранних записях пользователей?
Все! Разблокировали. Порт агента вырубили, далее через CCD создали процессинг группу и впихнули агента в нее. Далее он спокойно отвалился по разлогину. Правда теперь абонент при поднятии трубки постоянно сообщает о выходе из группы
да, причем мне удалось удалить все записи из CCD кроме одного агента, на котором все затыкается и который походу завис, самое интересное, что он работает, а не просто болтается подменив собой реальный DN.
Да, действительно дело заключалось не в параметре, впрочем сейчас возникли другие грабли, супервизор спокойно входит и выходит в сеанс, а вот агент (аналоговый аппарат) застрял где-то посередине, смог залогинится, но не смог выбрать группу и теперь не может сделать логоф. Состояние - Pre-assigned и никакими увещеваниями он оттуда вылезать не хочет.
Добрый день! Подскажите пожалуйста, за что отвечает в cfgUpdate параметр 50 ACD supervisor accesses?
Попытался создать колл-центр, все стадии прошли нормально, но по вводимому префиксу на логон просит ввести свой идентификационный код - это номер агента?
Номер группы, очереди, пилота так же не подходят.
Собственно, в cfgUpdate параметр 50 ACD supervisor accesses равен 0 - это только доступ для супервизоров или так же для агентов?
После смены значения просит ребут, лишний раз дергать станцию не хочется. Поэтому хочу понять, что зависит от этого параметра.
У меня тоже есть подозрение, что неправильный адрес дали при установке, потому как плата ведет себя вполне прилично и не похоже, что это аппаратный сбой. В том же ящике стоит еще одна точно такая же в 20 слоте, прошивку сдергивает.
Сложно сказать, заказчик сам не помнит, говорит что не работает довольно давно.
В общем лог сняли, в принципе понятно, что он не может сдернуть прошивку, непонятно почему этого не происходит.
Код
U-Boot 1.3.0-rc3 (Mar 5 2010 - 11:50:23) 3EH30451AAAM bootl100/000.012
Reset Status:
CPU: e300c4, MPC8377, Rev: 21 at 666.666 MHz, CSB: 333 MHz
I2C: ready
DRAM:
DDR DIMM: data bus width is 64 bit without ECC
DDRC ECC mode: OFF
DDR RAM: 256 MB
FPGA: /soc@e0000000/gpio@c00/fpga@01f00000: FPGA4C1NV loading... done
FLASH: 2 MB
PCI: Bus Dev VenId DevId Class Int
00 17 1064 2102 0000 00
00 18 1064 2102 0000 00
00 1d 10ee 0300 0b40 ff
In: serial
Out: serial
Err: serial
Net: TSEC0, TSEC1
eSDHC: 4bit-buswidth mode
SATA: SATA0 [Link: no RDY]
SATA1 [Link: no RDY]
## Booting image at ff836de0 ...
Image Name: aleboot.bin
Image Type: PowerPC U-Boot Standalone Program (uncompressed)
Data Size: 8840 Bytes = 8.6 kB
Load Address: 00200000
Entry Point: 00201954
Verifying Checksum ... OK
OK
m41t11 Chip
No Prompt
Press ^B^I to enter into the Bios menu 0 Booting from SDMMC
Hit any key to stop autoboot: 0
## Booting image at ff8390a8 ...
Image Name: gpioinit.bin
Image Type: PowerPC U-Boot Standalone Program (uncompressed)
Data Size: 2185 Bytes = 2.1 kB
Load Address: 00200000
Entry Point: 00200620
Verifying Checksum ... OK
OK
Watchdog Started
898 bytes read
## Executing script at 00100000
1851658 bytes read
10996310 bytes read
## Booting image at 04000000 ...
Image Name: Linux-2.6.23.17-020.001
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1851594 Bytes = 1.8 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 06000000 ...
Image Name: OXE_NGP_2.0_int
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 10996246 Bytes = 10.5 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Booting using the fdt at 0x5800000
Loading Ramdisk to 0f522000, end 0ff9ea16 ... OK
Loading Device Tree to 007fd000, end 007fefff ... OK
setup_arch: bootmem
ale8377_intip3_setup_arch()
arch: exit
Using Alcatel-Lucent 8377 INTIP3 machine description
Linux version 2.6.23.17-020.001 (dri@frillux) (gcc version 4.1.2) #1 PREEMPT Thu Jul 16 11:07:18 CEST 2009
Found initrd at 0xcf522000:0xcff9ea16
[MTD] Found 5 partitions in device-tree
Found MPC83xx PCI host bridge at 0x00000000e0008500. Firmware bus number: 0->0
Zone PFN ranges:
DMA 0 -> 65536
Normal 65536 -> 65536
HighMem 65536 -> 65536
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 65536
Built 1 zonelists in Zone order. Total pages: 65024
Kernel command line: root=/dev/ram console=ttyS0,9600 powersave=off boot_from=flash console_baudrate=9600 factory_mode=no
IPIC (128 IRQ sources) at fcffb700
PID hash table entries: 1024 (order: 10, 4096 bytes)
I-pipe 2.0-09: pipeline enabled.
console [kgdb0] enabled
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 244352k/262144k available (3684k kernel code, 17436k reserved, 156k data, 525k bss, 148k init)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Found MPC8377 (hardware revision 2.1)
Read ALE devices configuration from DeviceTree
NULL bootp pointer
PCI: Probing PCI hardware
Generic PHY: Registered new driver
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 10738k freed
prom_parse: Bad cell count for /soc@e0000000/mdio@24520/ethernet-phy@1
prom_parse: Bad cell count for /soc@e0000000/mdio@24520/ethernet-phy@2
Xenomai: system heap size: 16384 kB
I-pipe: Domain Xenomai registered.
Xenomai: hal/powerpc started.
Xenomai: init success
I-pipe: Domain IShield registered.
Xenomai: real-time nucleus v2.4.5 (Overdriver) loaded.
Xenomai: starting native API services.
Xenomai: starting POSIX services.
Xenomai: starting RTDM services.
Xenomai: starting RTAI emulator.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xe0004500 mem 0xd1002500 (irq = 20) is a 16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0xe0004600 mem 0xd1004600 (irq = 21) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Gianfar MII Bus: probed
eth0: Gianfar Ethernet Controller Version 1.3-skbr, 00:80:9f:b5:23:f8
GFAR: SKB Handler initialized at CPU#0(max=32)
eth0: MTU = 1500 (frame size=1526, truesize=1808)
eth0: Running with NAPI disabled
eth0: 1024/256 RX/TX BD ring size
eth1: Gianfar Ethernet Controller Version 1.3-skbr, 00:80:9f:b5:23:f9
GFAR: SKB Handler initialized at CPU#0(max=32)
eth1: MTU = 1500 (frame size=1526, truesize=1808)
eth1: Running with NAPI disabled
eth1: 1024/256 RX/TX BD ring size
kgdboe: couldn't parse config at not_configured!
kgdboe: configuration incorrect - kgdboe not loaded.
Usage: kgdboe=[src-port]@[src-ip]/[dev],[tgt-port]@<tgt-ip>/<tgt-macaddr>
physmap platform flash device: 00200000 at ff800000
physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition information
Creating 4 MTD partitions on "physmap-flash.0":
0x00000000-0x000e0000 : "firmware"
0x000e0000-0x00100000 : "hardware"
0x00110000-0x001f0000 : "fs"
0x001f0000-0x00200000 : "factory"
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
esdhc: Freescale Enhanced Secure Digital Host Controller driver
esdhc:slot0: SDCard is Full-Speed Capable (25 MHz)
esdhc:slot0: Invalid maximum block size, assuming 512
mmc0: ESDHC at 0xe002e000 irq 42 DMA
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 148k init
esdhc:slot0: SDCard clock is now running at 372023 Hz
esdhc:slot0: SDCard clock is now running at 23809523 Hz
mmc0: new SD card at address 0007
mmcblk0: mmc0:0007 SD01G 995328KiB
mmcblk0: p1
loop: module loaded
Thu Jan 1 00:00:10 UTC 1970
[Script /etc/rc.d/rc.sysinit (PID=893) started by "init"]
[starti802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
ng cron]
crond[All bugs added by David S. Miller <davem@redhat.com>
1322]: crond 1.7.2 started, log level 8
[SetEthernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
ting kernel/netwbonding: MII link monitoring set to 200 ms
ork/platform options]
[insertinbonding: bond0: Warning: failed to get speed and duplex from eth0, assumed to be 100Mb/sec and Full.
g kernel modulesbonding: bond0: making interface eth0 the new active one.
]
inserting 802bonding: bond0: first active interface up!
1q ()
insertingbonding: bond0: enslaving eth0 as an active interface with an up link.
bonding (mode=1bonding: bond0: Warning: failed to get speed and duplex from eth1, assumed to be 100Mb/sec and Full.
bonding: bond0: enslaving eth1 as a backup interface with an up link.
inserting x_tables ()
inserting ipt_ttl ()
inserting ipt_TTL ()
inserting ip_tables ()
ip_tables: (C) 2000-2006 Netfilter Core Team
inserting xt_NFLOG ()
inserting xt_NFQUEUE ()
Netfilter messages via NETLINK v0.30.
inserting nfnetlink_queue ()
inserting nfnetlink_log ()
inserting iptable_filter ()
inserting iptable_mangle ()
inserting iptable_raw ()
inserting xt_tcpudp ()
insertintun: Universal TUN/TAP device driver, 1.6
g xt_mark ()
intun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
serting xt_MARK bonding: bond0: link status definitely down for interface eth0, disabling it
bonding: bond0: making interface eth1 the new active one.
()
inserting tun ()
inserting alz-driver ()
Register platform Alcatel-Lucent 8377 INTIP3 specific functions
Invalid magic in bootp request
[wdt] Driver Initialization
cCPU Watchdog Timer not enabled (60 seconds, nowayout=0) tdelay=1000
bonding: bond0: link status definitely down for interface eth1, disabling it
bonding: bond0: now running without any active interface !
rtc model m41t11
m41t11 0-0068: rtc core: registered m41t11 as rtc0
[alz] Register alz_gpio...
[alz] Register Armada EEPROM drivers
[alz] Found EEPROM at 0x53 (Armada4)
Registered led device: CPUgreen
Registered led device: CPUred
Registered led device: CPUyellow
Registered led device: BSYyellow
[Restore system m41t11 0-0068: read: 02 54 d0 05 26 07 12
m41t11 0-0068: read secs=2, mins=54, hours=10, mday=26, mon=6, year=112, wday=4
Thu Jul 26 10:54:02 UTC 2012
[starting background processes]
[starting syslogd]
[Lock reset management to kernel module]
[start loopback device]
[starting network]
[Check Storage device]
PHY: e0024520:02 - Link is Up - 10/Half
bonding: bond0: link status definitely up for interface eth1.
bonding: bond0: making interface eth1 the new active one.
bonding: bond0: first active interface up!
[Check SDcard partition]
[Try to mount SDkjournald starting. Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS on mmcblk0p1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[SDcard partition OK]
[BOOT directory to be updated]
End of platform init
[Wait for 5m before rotating log to keep header]
Thu Jul 26 10:54:06 UTC 2012
[Script /etc/rc.d/rc (PID=1488) started by "init"]
=== BIENVENUE TO INTIP 3 Software secu v. 03.86 in INTIP3 / INTIPB role ===
=== Kernel version : 2.6.23.17-020.001 ===
***** SDcard owner = intip3 ***** Board = intip3 *****
[Retrieve IPMG configuration]
/mnt/flash/local/ipmg.cfg: OK
Find ipmg.cfg configuration file in /mnt/flash/local
/mnt/flash/local/startup.cfg: OK
Find startup.cfg configuration file in /mnt/flash/local
/mnt/flash/local/pcs.cfg: OK
Find pcs.cfg configuration file in /mnt/flash/local
Reading of configuration in flash finished
No password file found - using default password list
Duplex mode set to 1 BUT forced to auto-negociation mode
Starting /etc/rc.d/rcS/01pipe
Starting /etc/rc.d/rcS/10network
Setting hostname....
[Start mod_incid
INCIDENT_DEVICE :: INCIDENT driver registered to Linux
.ko]
[Start net_restart]
bonding: bond0: Warning: the permanent HWaddr of eth0 - 00:80:9F:B5:23:F8 - is still in use by bond0. Set the HWaddr of eth0 to a different address to avoid conflicts.
bonding: bond0: releasing backup interface eth0
bonding: bond0: releasing active interface eth1
bonding: bond0: enslaving eth0 as a backup interface with a down link.
bonding: bond0: making interface eth1 the new active one.
bonding: bond0: first active interface up!
bonding: bond0: enslaving eth1 as an active interface with an up link.
Bringing up interface bond0 ....
Detected current net interface : eth1
bonding: bond0: link status definitely down for interface eth1, disabling it
bonding: bond0: now running without any active interface !
PHY: e0024520:02 - Link is Up - 10/Half
bonding: bond0: link status definitely up for interface eth1.
bonding: bond0: making interface eth1 the new active one.
bonding: bond0: first active interface up!
[Checking duplicated IP addr 10.**.**.138 through bond0]
[ IP addr checked and DOES NOT appear duplicated ]
IPv4 packet forwarding is enabled....
IPv4 automatic defragmentation is disabled....
IPv4 TCP timestamps is disabled....
Starting /etc/rc.d/rcS/90init
Uboot updater is now working ... getting current version information
Check if we need to upd ate with Uboot bootl100/000.012 ...
Current version : bootl100/000.012 / Recorded version : bootl100/000.012
..... Uboot update not needed .....
[Warning] Net status : yes at 10Mb/s
[Warning] Call lanpbx_mngt
Authentification lanpbx FAILED --> see /var/log/lanpbx_mngt
LANPBX.CFG contents :
-> TYPE=A4400 VERSION=1 IP_DOWNLOAD=10.**.**.250
[Start build_hosts 0]
start of load appli modules phase
Loading modules - please wait ...
[Start RT2LxCMD]
[Start xeno_bkRegistering Adeos/Xenomai Backtrace
t.ko]
[xeno_bkt]: Albator pid is 1454
[Start xeno_ipmgxeno_ipmg_drv: module license 'Alcatel-Lucent' taints kernel.
_drv.ko]
ipmg_drv module loaded
/proc/IPMG proc entry created
[alz] Found I2C device, EEPROM at 0x2
[Start inox_hpi.ko & inox_pci.ko common interfacInox_pci found 2 Dsps
e]
Inox_pci found 2 Dsps
[Start dbg_mngr.ko and fw_mngr.ko telecom DSPs lModule rt_printf loaded
ow level management]
[Start xenStarting monitor using pipe 1
o_printf.ko]
[SUUtart xeno_monitor.ko]
binamcvb642x AUTHENTICATION OK
[Start amcvd.ko common interface]
nbInox:2 dspInfos.InoxId:0 dspInfos.Pos:2 inoxTelId:0 => dspId:6
nbInox:2 dspInfos.InoxId:0 dspInfos.Pos:3 inoxTelId:0 => dspId:7
nbInox:2 dspInfos.InoxId:1 dspInfos.Pos:0 inoxTelId:0 => dspId:0
nbInox:2 dspInfos.InoxId:1 dspInfos.Pos:1 inoxTelId:0 => dspId:1
DSPWare Version : AMCVB / 2.16 / Checksum f0a19003
[Start adiat_driCreate /proc/adiat
ver.ko common inAdiat driver module loaded
terface]
[Start xeno_mem_/proc/IPMG/DMAMemoryManager proc entry created
mgr.ko]
rt_mem_mgr : General Heap for Real Time : 16777216 bytes
DMA memory allcator initialized : 20 chunks of 131072 bytes
Real-Time Linux Dynamic Memory Manager
[Start xeno_syscxeno_syscall : module loaded.
all.ko]
[Start xeno_syscall_agent]
[Start xeno_ca_kernel.ko]
Application specification : intip3
Alcatel-Lucent kernel module loading...
---------------- Rings Init : Begin ---------------
ca_kernel : Creating Heap Tx [ OK ]
ca_kernel : Allocating Heap Tx [512] [ OK ]
ca_kernel : Creating Heap Rx [ OK ]
ca_kernel : Allocating Heap Rx [512] [ OK ]
---------------- Rings Init : End -----------------
fastsk : Shared heap allocated
Module Kernel Loaded
[Start Socket Agent]
[Start c1nv_mngt.ko]
[Use of /mnt/flash/local/tonesnv]
pci_get_device cffe9000
pci_enable_device 0
pci_request_region 2 0
ioremap 2 d3a00000
pci_request_region 1 0
ioremap 1 d3a80000
pci_request_region 0 0
ioremap 0 fcffe400
irq = 18
request_firmware BNVINTIP 0 d22f0fd8
request_firmware TONES 0 d22f1128
[Start intip_mngt.ko]
SoftMSM_Sig = 0
ca_kernel : Fast Socket Initialization.
ca_kernel : no param_8021q=-1 is used
ca_kernel : no vlan set
Module INTIP Loaded
[Start c1nv_procDirectory /mnt/flash/info/c1nv OK
.ko]
/mnt/flash/info/c1nv/c1nvnorst doesn't exist -1
Next idx_hist: 1
[Start srtp_module.ko]
SRTP Module is loading...
SRTP Module version 1.0/1.0.06
SRTP Module is loaded
Create /proc/softmsm_voice
[Start ca_media_server.ko]
media Module is loading...
media Module version May 20 2011-14:02:27
media Module Author Written by ALE ...
Starting Load of media server module
End of update_obj_tb phase
End of determine_offset phase : 9 objects passed
Start of allocators construction phase (static)
init module media_server : after allocation of VoIP context objects pools
End of loop on channels from 0 to 128
Before special objects treatment : RTCP RR and fastsk for RTCP and T38 objects
End of link on fastsk objects for RTCP_RR : inst numbers from 128 to 255
End of link on fastsk objects for RTCP_SR : inst numbers from 256 to 383
End of link on fastsk objects for udptl : inst numbers from 384 to 511
fastsk objects srtp for Thales box : inst number 512
fastsk objects fax for Thales box : inst number 513
Module media_server loaded
media server module is loaded
end of load appli modules phase
[Start normal_startup rescue_off]
'binintip3
Downloading /DHS3bin/downbin/intip3/binintip3 from 10.**.**.250
/etc/rc.d/init.d/binipmg_download: download_binary binintip3 failed
/etc/rc.d/init.d/binipmg_download: download of binintip3 failed: file not found on server or bad transfer or file corrupted
/etc/rc.d/init.d/binipmg_download: sleeping 5s then retrying...
Downloading /DHS3bin/downbin/intip3/binintip3 from 10.**.**.250
/etc/rc.d/init.d/binipmg_download: download_binary binintip3 failed
/etc/rc.d/init.d/binipmg_download: download of binintip3 failed: file not found on server or bad transfer or file corrupted
/etc/rc.d/init.d/binipmg_download: sleeping 5s then retrying...
Downloading /DHS3bin/downbin/intip3/binintip3 from 10.**.**.250
/etc/rc.d/init.d/binipmg_download: download_binary binintip3 failed
/etc/rc.d/init.d/binipmg_download: too many retries, givin
C1drvDownloadBinary
C1drvDownloadBinary 0x0
C1drvIrqRequest
idx_hist 1
idx_hist 1
C1drvIrqEnable
C1drvRemoveReset
start ok
g up
binintip3 Updated histc1nv in flash
download failed /mnt/flash/info/c1nv/StartC1nv_1.log created in flash
after 3 retries
Startup inetd
[Start build_hosts 0]
Startup completed - awaiting user login ...
[Startup script ended : 90init]
=== BIENVENUE TO INTIP 3 Software secu in INTIP3 / INTIPB role ===
WARNING: root account has no password
Use 'passwd root' to enter a valid password
intip3 login: second reset request in StateStart
C1drvDownloadBinary
C1drvDownloadBinary 0x0
C1drvIrqRequest
idx_hist 1
idx_hist 1
C1drvIrqEnable
C1drvRemoveReset
start ok
Updated histc1nv in flash
/mnt/flash/info/c1nv/StartC1nv_1.log created in flash
Secure version
Not MGSec..IKE process not started !
IKE process not started !
STARTFILE ASKED := startintip3
Secure version
*****************************************************************
* Connect to callserver failed + no login within 1 mn => reboot *
*****************************************************************
Thu Jul 26 11:01:12 UTC 2012
[SCS requiring F_STOP_REQ> CurCnt:0ms WaitCnt:x32
F_STOP_ACK> CurCnt:b WaitCnt:32
F_CDIR_REQ> CurCnt:0ms WaitCnt:x14
F_CDIR_ACQ> CurCnt:0 WaitCnt:14
cript /etc/rc.shutdown (PID=2395) started by "init"]
Script Log disabled
U-Boot 1.3.0-rc3 (Mar 5 2010 - 11:50:23) 3EH30451AAAM bootl100/000.012
Reset Status: Software Hard, External/Internal Soft, External/Internal Hard
CPU: e300c4, MPC8377, Rev: 21 at 666.666 MHz, CSB: 333 MHz
I2C: ready
DRAM:
DDR DIMM: data bus width is 64 bit without ECC
DDRC ECC mode: OFF
DDR RAM: 256 MB
FPGA: /soc@e0000000/gpio@c00/fpga@01f00000: FPGA4C1NV reloading... done
FLASH: 2 MB
PCI: Bus Dev VenId DevId Class Int
00 17 1064 2102 0000 00
00 18 1064 2102 0000 00
00 1d 10ee 0300 0b40 ff
In: serial
Out: serial
Err: serial
Net: TSEC0, TSEC1
eSDHC: 4bit-buswidth mode
SATA: SATA0 [Link: no RDY]
SATA1 [Link: no RDY]
## Booting image at ff836de0 ...
Image Name: aleboot.bin
Image Type: PowerPC U-Boot Standalone Program (uncompressed)
Data Size: 8840 Bytes = 8.6 kB
Load Address: 00200000
Entry Point: 00201954
Verifying Checksum ... OK
OK
m41t11 Chip
No Prompt
Press ^B^I to enter into the Bios menu 0 Booting from SDMMC
Hit any key to stop autoboot: 0
## Booting image at ff8390a8 ...
Image Name: gpioinit.bin
Image Type: PowerPC U-Boot Standalone Program (uncompressed)
Data Size: 2185 Bytes = 2.1 kB
Load Address: 00200000
Entry Point: 00200620
Verifying Checksum ... OK
OK
Watchdog Started
898 bytes read
## Executing script at 00100000
1851658 bytes read
10996310 bytes read
## Booting image at 04000000 ...
Image Name: Linux-2.6.23.17-020.001
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1851594 Bytes = 1.8 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 06000000 ...
Image Name: OXE_NGP_2.0_int
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 10996246 Bytes = 10.5 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Booting using the fdt at 0x5800000
Loading Ramdisk to 0f522000, end 0ff9ea16 ... OK
Loading Device Tree to 007fd000, end 007fefff ... OK
setup_arch: bootmem
ale8377_intip3_setup_arch()
arch: exit
Using Alcatel-Lucent 8377 INTIP3 machine description
Linux version 2.6.23.17-020.001 (dri@frillux) (gcc version 4.1.2) #1 PREEMPT Thu Jul 16 11:07:18 CEST 2009
Found initrd at 0xcf522000:0xcff9ea16
[MTD] Found 5 partitions in device-tree
Found MPC83xx PCI host bridge at 0x00000000e0008500. Firmware bus number: 0->0
Zone PFN ranges:
DMA 0 -> 65536
Normal 65536 -> 65536
HighMem 65536 -> 65536
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 65536
Built 1 zonelists in Zone order. Total pages: 65024
Kernel command line: root=/dev/ram console=ttyS0,9600 powersave=off boot_from=flash console_baudrate=9600 factory_mode=no
IPIC (128 IRQ sources) at fcffb700
PID hash table entries: 1024 (order: 10, 4096 bytes)
I-pipe 2.0-09: pipeline enabled.
console [kgdb0] enabled
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 244352k/262144k available (3684k kernel code, 17436k reserved, 156k data, 525k bss, 148k init)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Found MPC8377 (hardware revision 2.1)
Read ALE devices configuration from DeviceTree
NULL bootp pointer
PCI: Probing PCI hardware
Generic PHY: Registered new driver
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 10738k freed
prom_parse: Bad cell count for /soc@e0000000/mdio@24520/ethernet-phy@1
prom_parse: Bad cell count for /soc@e0000000/mdio@24520/ethernet-phy@2
Xenomai: system heap size: 16384 kB
I-pipe: Domain Xenomai registered.
Xenomai: hal/powerpc started.
Xenomai: init success
I-pipe: Domain IShield registered.
Xenomai: real-time nucleus v2.4.5 (Overdriver) loaded.
Xenomai: starting native API services.
Xenomai: starting POSIX services.
Xenomai: starting RTDM services.
Xenomai: starting RTAI emulator.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xe0004500 mem 0xd1002500 (irq = 20) is a 16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0xe0004600 mem 0xd1004600 (irq = 21) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Gianfar MII Bus: probed
eth0: Gianfar Ethernet Controller Version 1.3-skbr, 00:80:9f:b5:23:f8
GFAR: SKB Handler initialized at CPU#0(max=32)
eth0: MTU = 1500 (frame size=1526, truesize=1808)
eth0: Running with NAPI disabled
eth0: 1024/256 RX/TX BD ring size
eth1: Gianfar Ethernet Controller Version 1.3-skbr, 00:80:9f:b5:23:f9
GFAR: SKB Handler initialized at CPU#0(max=32)
eth1: MTU = 1500 (frame size=1526, truesize=1808)
eth1: Running with NAPI disabled
eth1: 1024/256 RX/TX BD ring size
kgdboe: couldn't parse config at not_configured!
kgdboe: configuration incorrect - kgdboe not loaded.
Usage: kgdboe=[src-port]@[src-ip]/[dev],[tgt-port]@<tgt-ip>/<tgt-macaddr>
physmap platform flash device: 00200000 at ff800000
physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition information
Creating 4 MTD partitions on "physmap-flash.0":
0x00000000-0x000e0000 : "firmware"
0x000e0000-0x00100000 : "hardware"
0x00110000-0x001f0000 : "fs"
0x001f0000-0x00200000 : "factory"
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
esdhc: Freescale Enhanced Secure Digital Host Controller driver
esdhc:slot0: SDCard is Full-Speed Capable (25 MHz)
esdhc:slot0: Invalid maximum block size, assuming 512
mmc0: ESDHC at 0xe002e000 irq 42 DMA
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 148k init
esdhc:slot0: SDCard clock is now running at 372023 Hz
esdhc:slot0: SDCard clock is now running at 23809523 Hz
mmc0: new SD card at address 0007
mmcblk0: mmc0:0007 SD01G 995328KiB
mmcblk0: p1
loop: module loaded
Thu Jan 1 00:00:10 UTC 1970
[Script /etc/rc.d/rc.sysinit (PID=893) started by "init"]
[starti802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
ng cron]
crond[All bugs added by David S. Miller <davem@redhat.com>
1322]: crond 1.7.2 started, log level 8
[SetEthernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
ting kernel/netwbonding: MII link monitoring set to 200 ms
ork/platform options]
[insertinbonding: bond0: Warning: failed to get speed and duplex from eth0, assumed to be 100Mb/sec and Full.
g kernel modulesbonding: bond0: making interface eth0 the new active one.
]
inserting 802bonding: bond0: first active interface up!
1q ()
insertingbonding: bond0: enslaving eth0 as an active interface with an up link.
bonding (mode=1bonding: bond0: Warning: failed to get speed and duplex from eth1, assumed to be 100Mb/sec and Full.
bonding: bond0: enslaving eth1 as a backup interface with an up link.
inserting x_tables ()
inserting ipt_ttl ()
inserting ipt_TTL ()
inserting ip_tables ()
ip_tables: (C) 2000-2006 Netfilter Core Team
inserting xt_NFLOG ()
inserting xt_NFQUEUE ()
Netfilter messages via NETLINK v0.30.
inserting nfnetlink_queue ()
inserting nfnetlink_log ()
inserting iptable_filter ()
inserting iptable_mangle ()
inserting iptable_raw ()
inserting xt_tcpudp ()
insertintun: Universal TUN/TAP device driver, 1.6
g xt_mark ()
intun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
serting xt_MARK bonding: bond0: link status definitely down for interface eth0, disabling it
bonding: bond0: making interface eth1 the new active one.
()
inserting tun ()
inserting alz-driver ()
Register platform Alcatel-Lucent 8377 INTIP3 specific functions
Invalid magic in bootp request
[wdt] Driver Initialization
cCPU Watchdog Timer not enabled (60 seconds, nowayout=0) tdelay=1000
bonding: bond0: link status definitely down for interface eth1, disabling it
bonding: bond0: now running without any active interface !
rtc model m41t11
m41t11 0-0068: rtc core: registered m41t11 as rtc0
[alz] Register alz_gpio...
[alz] Register Armada EEPROM drivers
[alz] Found EEPROM at 0x53 (Armada4)
Registered led device: CPUgreen
Registered led device: CPUred
Registered led device: CPUyellow
Registered led device: BSYyellow
[Restore system m41t11 0-0068: read: 18 25 d1 05 26 07 12
m41t11 0-0068: read secs=18, mins=25, hours=11, mday=26, mon=6, year=112, wday=4
Thu Jul 26 11:25:18 UTC 2012
[starting background processes]
[starting syslogd]
[Lock reset management to kernel module]
[start loopback device]
[starting network]
[Check Storage device]
[Check SDcard partition]
PHY: e0024520:01 - Link is Up - 1000/Full
bonding: bond0: link status definitely up for interface eth0.
bonding: bond0: making interface eth0 the new active one.
bonding: bond0: first active interface up!
[Try to mount SDkjournald starting. Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS on mmcblk0p1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[SDcard partition OK]
[BOOT directory to be updated]
End of platform init
[Wait for 5m before rotating log to keep header]
Thu Jul 26 11:25:21 UTC 2012
[Script /etc/rc.d/rc (PID=1488) started by "init"]
=== BIENVENUE TO INTIP 3 Software secu v. 03.86 in INTIP3 / INTIPB role ===
=== Kernel version : 2.6.23.17-020.001 ===
***** SDcard owner = intip3 ***** Board = intip3 *****
[Retrieve IPMG configuration]
/mnt/flash/local/ipmg.cfg: OK
Find ipmg.cfg configuration file in /mnt/flash/local
/mnt/flash/local/startup.cfg: OK
Find startup.cfg configuration file in /mnt/flash/local
/mnt/flash/local/pcs.cfg: OK
Find pcs.cfg configuration file in /mnt/flash/local
Reading of configuration in flash finished
No password file found - using default password list
Duplex mode set to 1 BUT forced to auto-negociation mode
Starting /etc/rc.d/rcS/01pipe
Starting /etc/rc.d/rcS/10network
Setting hostname....
[Start mod_incid
INCIDENT_DEVICE :: INCIDENT driver registered to Linux
.ko]
[Start net_restart]
bonding: bond0: Warning: the permanent HWaddr of eth0 - 00:80:9F:B5:23:F8 - is still in use by bond0. Set the HWaddr of eth0 to a different address to avoid conflicts.
bonding: bond0: releasing active interface eth0
bonding: bond0: releasing backup interface eth1
bonding: bond0: making interface eth0 the new active one.
bonding: bond0: first active interface up!
bonding: bond0: enslaving eth0 as an active interface with an up link.
bonding: bond0: enslaving eth1 as a backup interface with a down link.
Bringing up interface bond0 ....
Detected current net interface : eth0
bonding: bond0: link status definitely down for interface eth0, disabling it
bonding: bond0: now running without any active interface !
PHY: e0024520:01 - Link is Up - 1000/Full
bonding: bond0: link status definitely up for interface eth0.
bonding: bond0: making interface eth0 the new active one.
bonding: bond0: first active interface up!
[Checking duplicated IP addr 10.**.**.138 through bond0]
[ IP addr checked and DOES NOT appear duplicated ]
IPv4 packet forwarding is enabled....
IPv4 automatic defragmentation is disabled....
IPv4 TCP timestamps is disabled....
Starting /etc/rc.d/rcS/90init
Uboot updater is now working ... getting current version information
Check if we need to update with Uboot bootl100/000.012 ...
Current version : bootl100/000.012 / Recorded version : bootl100/000.012
..... Uboot update not needed .....
[Warning] Net status : yes at 1000Mb/s
[Warning] Call lanpbx_mngt
Authentification lanpbx FAILED --> see /var/log/lanpbx_mngt
LANPBX.CFG contents :
-> TYPE=A4400 VERSION=1 IP_DOWNLOAD=10.**.**.250
[Start build_hosts 0]
start of load appli modules phase
Loading modules - please wait ...
[Start RT2LxCMD]
[Start xeno_bkRegistering Adeos/Xenomai Backtrace
t.ko]
[xeno_bkt]: Albator pid is 1454
[Start xeno_ipmgxeno_ipmg_drv: module license 'Alcatel-Lucent' taints kernel.
_drv.ko]
ipmg_drv module loaded
/proc/IPMG proc entry created
[alz] Found I2C device, EEPROM at 0x2
[Start inox_hpi.ko & inox_pci.ko common interfacInox_pci found 2 Dsps
e]
Inox_pci found 2 Dsps
[Start dbg_mngr.ko and fw_mngr.ko telecom DSPs lModule rt_printf loaded
ow level managemStarting monitor using pipe 1
ent]
[Start xenUUo_printf.ko]
[Start xeno_monitor.ko]
binamcvb642x AUTHENTICATION OK
[Start amcvd.ko common interface]
nbInox:2 dspInfos.InoxId:0 dspInfos.Pos:2 inoxTelId:0 => dspId:6
nbInox:2 dspInfos.InoxId:0 dspInfos.Pos:3 inoxTelId:0 => dspId:7
nbInox:2 dspInfos.InoxId:1 dspInfos.Pos:0 inoxTelId:0 => dspId:0
nbInox:2 dspInfos.InoxId:1 dspInfos.Pos:1 inoxTelId:0 => dspId:1
DSPWare Version : AMCVB / 2.16 / Checksum f0a19003
[Start adiat_driCreate /proc/adiat
ver.ko common inAdiat driver module loaded
terface]
[Start xeno_mem_/proc/IPMG/DMAMemoryManager proc entry created
mgr.ko]
rt_mem_mgr : General Heap for Real Time : 16777216 bytes
DMA memory allcator initialized : 20 chunks of 131072 bytes
Real-Time Linux Dynamic Memory Manager
[Start xeno_syscxeno_syscall : module loaded.
all.ko]
[Start xeno_syscall_agent]
[Start xeno_ca_kernel.ko]
Application specification : intip3
Alcatel-Lucent kernel module loading...
---------------- Rings Init : Begin ---------------
ca_kernel : Creating Heap Tx [ OK ]
ca_kernel : Allocating Heap Tx [512] [ OK ]
ca_kernel : Creating Heap Rx [ OK ]
ca_kernel : Allocating Heap Rx [512] [ OK ]
---------------- Rings Init : End -----------------
fastsk : Shared heap allocated
Module Kernel Loaded
[Start Socket Agent]
[Start c1nv_mngt.ko]
[Use of /mnt/flash/local/tonesnv]
pci_get_device cffe9000
pci_enable_device 0
pci_request_region 2 0
ioremap 2 d3a00000
pci_request_region 1 0
ioremap 1 d3a80000
pci_request_region 0 0
ioremap 0 fcffe400
irq = 18
request_firmware BNVINTIP 0 d22f0fd8
request_firmware TONES 0 d22f1128
[Start intip_mngt.ko]
SoftMSM_Sig = 0
ca_kernel : Fast Socket Initialization.
ca_kernel : no param_8021q=-1 is used
ca_kernel : no vlan se t
Module INTIP Loaded
[Start c1nv_procDirectory /mnt/flash/info/c1nv OK
.ko]
/mnt/flash/info/c1nv/c1nvnorst doesn't exist -1
Next idx_hist: 0
[Start srtp_module.ko]
SRTP Module is loading...
SRTP Module version 1.0/1.0.06
SRTP Module is loaded
Create /proc/softmsm_voice
[Start ca_media_server.ko]
media Module is loading...
media Module version May 20 2011-14:02:27
media Module Author Written by ALE ...
Starting Load of media server module
End of update_obj_tb phase
End of determine_offset phase : 9 objects passed
Start of allocators construction phase (static)
init module media_server : after allocation of VoIP context objects pools
End of loop on channels from 0 to 128
Before special objects treatment : RTCP RR and fastsk for RTCP and T38 objects
End of link on fastsk objects for RTCP_RR : inst numbers from 128 to 255
End of link on fastsk objects for RTCP_SR : inst numbers from 256 to 383
End of link on fastsk objects for udptl : inst numbers from 384 to 511
fastsk objects srtp for Thales box : inst number 512
fastsk objects fax for Thales box : inst number 513
Module media_server loaded
media server module is loaded
end of load appli modules phase
[Start normal_startup rescue_off]
'binintip3
Downloading /DHS3bin/downbin/intip3/binintip3 from 10.**.**.250
/etc/rc.d/init.d/binipmg_download: download_binary binintip3 failed
/etc/rc.d/init.d/binipmg_download: download of binintip3 failed: file not found on server or bad transfer or file corrupted
/etc/rc.d/init.d/binipmg_download: sleeping 5s then retrying...
Downloading /DHS3bin/downbin/intip3/binintip3 from 10.**.**.250
/etc/rc.d/init.d/binipmg_download: download_binary binintip3 failed
/etc/rc.d/init.d/binipmg_download: download of binintip3 failed: file not found on server or bad transfer or file corrupted
/etc/rc.d/init.d/binipmg_download: sleeping 5s then retrying...
Downloading /DHS3bin/downbin/intip3/binintip3 from 10.**.**.250
/etc/rc.d/init.d/binipmg_download: download_binary binintip3 failed
/etc/rc.d/init.d/binipmg_download: too many retries, givin
C1drvDownloadBinary
C1drvDownloadBinary 0x0
C1drvIrqRequest
idx_hist 0
idx_hist 0
C1drvIrqEnable
C1drvRemoveReset
start ok
g up
binintip3 Updated histc1nv in flash
download failed /mnt/flash/info/c1nv/StartC1nv_0.log created in flash
after 3 retries
Startup inetd
[Start build_hosts 0]
Startup completed - awaiting user login ...
[Startup script ended : 90init]
=== BIENVENUE TO INTIP 3 Software secu in INTIP3 / INTIPB role ===
WARNING: root account has no password
Use 'passwd root' to enter a valid password
intip3 login: root
Bienvenue to user root
-bash-3.2# ping Secure version
1Not MGSec..IKE process not started !
IKE process not started !
0.21.2.STARTFILE ASKED := startintip3
254
PING 10.**.**.250 (10.**.**.250): 56 data bytes
--- 10.**.**.250 -bash-3.2# exSecure version
it
logout
Welcome to intip3
IP is 10.**.**.138
*** Warning: connect to callserver failed ! ***
*** Please use resolve_connect to get possible cause of failure ***
intip3 login:
*****************************************************************
* Connect to callserver failed + no login within 1 mn => reboot *
*****************************************************************
