Нужна регистрация на сайте.
Ниже содержимое одного из файлов
###########################################################################
# #
# 4008EE / 4018EE SIP-Touch sets configuration file #
# SIP : 2.10.60 & 2.10.70 & 2.10.80 & 2.10.90 #
# #
# This example contains all parameters which may be managed via the #
# config file and is in line with 3AK_29000_0285_PEZZA_21 #
# #
###########################################################################
###########################################################################
## Syntax informations :
##
## All parameters are grouped by sections (the section name is specified
## with the syntax [section1]). The content is UTF-8 encoded
## Each configuration item uses a single line with a "key=value" pattern
## "Key" content starts at the first none-space character and ends with "="
## or " ="
## "Value" content starts at the first none-space character and ends at the
## "\n\r"
## If the value is empty, the terminal should use the default value instead
## Lines starting with "#" will be ignored as a comment
## The items of a list are separated by a ","
###########################################################################
[dns]
###########################################################################
## The primary DNS IP address HAS TO BE FILLED
## If no DNS, use the SIP proxy address instead
###########################################################################
dns_addr=10.193.24.103
dns2_addr=
hostname=
[sip]
###########################################################################
## Domain name : IP address, FQDN or domain name (see the SIP proxy config)
###########################################################################
domain_name=10.193.24.103
###########################################################################
## Primary SIP proxy and SIP registrar settings
##
## Proxy address : IP address, FQDN or domain name
## Registrar address : IP address, FQDN or domain name (usually, the proxy)
## SIP proxy UDP port : usually 5060
## SIP registrar UDP port : by default 5060
###########################################################################
proxy_addr=10.193.24.103
proxy_port=5060
registrar_addr=10.193.24.103
registrar_port=5060
outbound_proxy_addr=
outbound_proxy_port=
###########################################################################
## Redundancy settings
##
## Proxy address : IP address, FQDN or domain name
## Registrar address : IP address, FQDN or domain name (usually, the proxy)
## SIP proxy UDP port : usually 5060
## SIP registrar UDP port : by default 5060
## sip_transport_mode_survi : Transport mode in PCS mode
## 0 = UDP or TCP
## 1 = UDP
## 2 = TCP
## 3 = TLS_over_TCP
###########################################################################
proxy2_addr=
proxy2_port=
registrar2_addr=
registrar2_port=
outbound_proxy2_addr=
outbound_proxy2_port=
pcs_addr=
pcs_port=
sip_transport_mode_survi=
option_timer=120
###########################################################################
## Global SIP parameters
## Transport mode : 0 = UDP or TCP
## 1 = UDP
## 2 = TCP
## 3 = TLS_over_TCP
## local_rtp_port : RFC3605 is not supported in this release, so
## only default value can be used
## auth_tag : 0 = disable SRTP authentication
## 1 = enable SRTP authentication
## PRACK type : 0 = PRACK supported
## 1 = PRACK required
## 2 = PRACK disabled
## Codec settings : 0 = G711 (PCMU)
## 4 = G723.1
## 8 = G711 (PCMA)
## 18 = G729A
###########################################################################
register_expire=3600
register_retry=300
local_sip_port=
sip_transport_mode=0
local_rtp_port=42000
local_rtcp_port=42001
auth_tag=
local_srtp_port=30000
local_srtcp_port=30001
prack_type=0
preferred_vocoder=8,0,4,18
###########################################################################
## SIP authentication.
##
## Realm : If no authentication, leave empty
## Authentication name : HAS TO BE FILLED
## If no authentication, PUT A VALUE LIKE none
## Authentication password : If no authentication, leave empty
###########################################################################
authentication_realm=
authentication_name=none
authentication_password=
user_name=
display_name=
###########################################################################
## Voicemail settings
##
## Voice mail URI : directory number of the voice mail
## user name : directory number of the set
## MWI URI : complete SIP URI of the voice mail
###########################################################################
voice_mail_uri=
message_waiting_indication_uri=
[qos]
###########################################################################
## SIP & RTP DIFFSERV : [0,63]
## SIP QOS Tickets : 0 = disable
## 1 = enable
## SIP QOS Tickets Target : domain name
###########################################################################
sip_diffserv=0
rtp_diffserv=0
sip_qos_tickets_enable=0
sip_qos_tickets_target=
[sntp]
###########################################################################
## SNTP server settings (can be OXE or an external server)
##
## Timezone construction : UT::60:032902:102503
## GMT delta : 60 = + sixty minutes from GMT time
## Daylight saving start (mmddhh) : 032902 = 29 March 2am
## Daylight saving end (mmddhh) : 102503 = 25 October 3am
## The daylight saving settings HAVE to be changed each year.
###########################################################################
sntp_addr=
timezone=UT::60:032902:102503
[telnet]
###########################################################################
## Password to access the telnet session
###########################################################################
telnet_password=000000
[arp]
###########################################################################
## Mode : 0 = ARP spoofing disabled
## 1 = ARP spoofing enabled
###########################################################################
arp_spoofing_enable=1
arp_spoofing_timer=30
[init]
###########################################################################
## For IP Touch with SIP binary in 1.xx, 2.00.10 and 2.00.20, equal or greater than 2.00.81
## mode 0 = SIP
## mode 1 = NOE
##
## For IP Touch with SIP binary 2.00.30 to 2.00.80
## mode 0 = NOE
## mode 1 = SIP
###########################################################################
application_mode=0
[audio]
###########################################################################
## Tone country : 0 = UK
## 1 = France
## 2 = Germany
## 3 = Italy
## 4 = Spain
## 5 = Netherlands
## 6 = Portugual
## DTMF type : 0 = RFC2833
## 1 = In-band
## 2 = SIP INFO
## DTMF level / RLR handset / SLR handset / Sidetone handset :
## 0 = 0db, 1 = +3db, 2 = +6db, 3 = -3db, 4 = -6db
## VAD / DTMF feedback / Hearing Aid :
## 0 = VAD not used
## 1 = VAD used
## answer_audio_mode: 0 = handfree
## 1 = handset
## 2 = headset
###########################################################################
tone_country=1
dtmf_type=1
dtmf_level=0
dtmf_avt_payload_type=101
vad=0
dtmf_feedback_enable=0
rlr_handset=0
slr_handset=0
sidetone_handset=2
hearing_aid_enable=0
answer_audio_mode=0
[appl]
###########################################################################
## Password to access the administrator menu on the phone (digits only)
## Power priority : 1 = critical
## 2 = high
## 3 = low
## Time format : 0 = 24 hours format
## 1 = AM / PM
## Speed dial numbers (first and last name, URI)
###########################################################################
admin_password=000000
remote_forward_code=
remote_forward_deactive_code=
power_priority=
asset_id=
time_format=
speed_dial_1_first_name=
speed_dial_1_last_name=
speed_dial_1_uri=
speed_dial_2_first_name=
speed_dial_2_last_name=
speed_dial_2_uri=
speed_dial_3_first_name=
speed_dial_3_last_name=
speed_dial_3_uri=
speed_dial_4_first_name=
speed_dial_4_last_name=
speed_dial_4_uri=
[admin]
###########################################################################
## Global admin parameters
## Binary polling timer : 10 min - 65535 min (default 480 min)
## Config polling timer : 5 min - 65535 min (default 60 min)
###########################################################################
binary_polling_timer=480
config_polling_timer=60
disable_pc_port=0
activate_vlan_filter=0