IPMG OXE 8.0.1 (g1.503.17)

ребутнули атс и GD-2 не поднялась

через консоль выташил лог, после того как пнул в биос на загрузку с CS она поднялась, причем все сетевые настройки сохранились

интересно из-за чего такое могло такое произойти


Module MIX loaded
Module ATL loaded
Module RESCUE loaded

PUC_device registered
Module DPNSS loaded
Module DSPx_LOAD loaded
Module UASIM loaded
[Flash NAND] Error in byte# 0109 Read: 0xd7<4> ,detected error in bit# 01, <4> Now: 0xd5
oemreadFailed type=4 ulStart=0x4299e00 uLength=0x400 bUseECC=1 bUseVBFEcc=0
[Flash NAND] -----------------------------------------------
[Flash NAND] Detected Soft Error at 0x04086000 : Garbage Collector.
[Flash NAND GC] Forced GC to Spare Unit #376
[Flash NAND GC] Logical Unit #532 sent to GC
[Flash NAND GC] This LU belongs to Region 133
[Flash NAND GC] This Region groups Logical Unit Number : <4>378 <4>461 <4>532 <4>533 <4>
[Flash NAND GC] Get info from Spare at 0x02f00000 :
[Flash NAND GC] erase count is 2
[Flash NAND GC] Get info from Unit at 0x04280000 :
[Flash NAND GC] erase count is 1
[Flash NAND] Error in byte# 0109 Read: 0xd7<4> ,detected error in bit# 01, <4> Now: 0xd5
oemreadFailed type=4 ulStart=0x429a000 uLength=0x200 bUseECC=1 bUseVBFEcc=0
[Flash NAND] Error in byte# 0164 Read: 0x1d<4> ,detected error in bit# 03, <4> Now: 0x15
oemreadFailed type=4 ulStart=0x429d000 uLength=0x200 bUseECC=1 bUseVBFEcc=0
[Flash NAND] GC performed. Re-mount Region.
[Flash NAND] This Region now groups Logical Unit Number : <4>376 <4>378 <4>461 <4>533 <4>
[Flash NAND] -----------------------------------------------
[Flash NAND] Error in byte# 0084 Read: 0x5b<4> ,detected error in bit# 04, <4> Now: 0x4b
oemreadFailed type=4 ulStart=0x42a9000 uLength=0x400 bUseECC=1 bUseVBFEcc=0
[Flash NAND] -----------------------------------------------
[Flash NAND] Detected Soft Error at 0x04095000 : Garbage Collector.
[Flash NAND GC] Forced GC to Spare Unit #377
[Flash NAND GC] Logical Unit #533 sent to GC
[Flash NAND GC] This LU belongs to Region 133
[Flash NAND GC] This Region groups Logical Unit Number : <4>376 <4>378 <4>461 <4>533 <4>
[Flash NAND GC] Get info from Spare at 0x02f20000 :
[Flash NAND GC] erase count is 3
[Flash NAND GC] Get info from Unit at 0x042a0000 :
[Flash NAND GC] erase count is 1
[Flash NAND] Error in byte# 0084 Read: 0x5b<4> ,detected error in bit# 04, <4> Now: 0x4b
oemreadFailed type=4 ulStart=0x42a9200 uLength=0x200 bUseECC=1 bUseVBFEcc=0
[Flash NAND] GC performed. Re-mount Region.
[Flash NAND] This Region now groups Logical Unit Number : <4>376 <4>377 <4>378 <4>461 <4>
[Flash NAND] -----------------------------------------------
[Flash NAND] Error in byte# 0034 Read: 0xa7<4> ,detected error in bit# 07, <4> Now: 0x27
oemreadFailed type=4 ulStart=0x2f5c200 uLength=0x400 bUseECC=1 bUseVBFEcc=0
[Flash NAND] -----------------------------------------------
[Flash NAND] Detected Soft Error at 0x040c8000 : Garbage Collector.
[Flash NAND GC] Forced GC to Spare Unit #379
[Flash NAND GC] Logical Unit #378 sent to GC
[Flash NAND GC] This LU belongs to Region 133
[Flash NAND GC] This Region groups Logical Unit Number : <4>376 <4>377 <4>378 <4>461 <4>
[Flash NAND GC] Get info from Spare at 0x02f60000 :
[Flash NAND GC] erase count is 2
[Flash NAND GC] Get info from Unit at 0x02f40000 :
[Flash NAND GC] erase count is 2
[Flash NAND] Error in byte# 0034 Read: 0xa7<4> ,detected error in bit# 07, <4> Now: 0x27
oemreadFailed type=4 ulStart=0x2f5c400 uLength=0x200 bUseECC=1 bUseVBFEcc=0
[Flash NAND] Error in byte# 0142 Read: 0x30<4> ,detected error in bit# 04, <4> Now: 0x20
oemreadFailed type=4 ulStart=0x2f5d200 uLength=0x200 bUseECC=1 bUseVBFEcc=0
[Flash NAND] GC performed. Re-mount Region.
[Flash NAND] This Region now groups Logical Unit Number : <4>376 <4>377 <4>379 <4>461 <4>
[Flash NAND] -----------------------------------------------