Уважаемые дамы и господа! Для вас сохранен старый форум по адресу http://forum.intersyst.ru

Страницы: 1
RSS
INT-IP3
 
Коллеги, кто подскажет для чего у INT-IP3 два Ethernet порта, как это можно использовать?
 
Ответ находится в неожиданном месте:

Alcatel-Lucent OmniPCX Enterprise
Communication Server
OXE System: Crystal Hardware Interface Boards
8AL91021USAE_1_en

15.1.2.5 Ethernet interfaces

Two Ethernet interfaces (eth0 and eth1) are available on the INT-IP3 board:

- As of R11.1, these two interfaces can be connected simultaneously for redundancy. For
more information, see the Installation Manuals, section Hardware Platform and Interfaces,
Boards Description, GD-3 board.

- Before R11.1, only one interface can be connected at the same time (no redundancy).
For board reflashing (advanced maintenance operation), only the etho interface can be used
as bootp/tftp LAN interface.
 
Да благодарю, сам только что нашел )
Страницы: 1
Читают тему