Доброго времени суток. Прошу помочь с настройкой ACT28.
Столкнулся с данным оборудованием впервые, прошу объяснять как для нуба, АТС уже зашита другими специалистами ранее, мне выпала возможность ее подключить,Все провода подключил как на аналогичной рабочей станции, уже введенной в эксплуатацию, подключился консольником, запустил, вот что пишет:
Последние 3 строки повторяются бесконечно (там где про 6, 16, 19 порты) в этих портах стоят eZ32-2.
Мне подсказали,что система хочет, чтобы я ввел логин, но ни на каком этапе ничего ввести не удается (не печатается). Даже тут:
Столкнулся с данным оборудованием впервые, прошу объяснять как для нуба, АТС уже зашита другими специалистами ранее, мне выпала возможность ее подключить,Все провода подключил как на аналогичной рабочей станции, уже введенной в эксплуатацию, подключился консольником, запустил, вот что пишет:
Код |
---|
’1Mo RAM OK hub = ICH2 loading XILINX first address: FFF50000 ,last adress: FFF729F4, first value : FF binary size : 138 Ko (141812 octets) FPGA HEX download begin ................................................................................................... FPGA download finished CheckSum = 0x65 Configuration ended (DONE = 1) No error (INIT/ERROR = 1) SR7= 4 Memory Test cascaded counter RESET and Watchdog restarted with 255 min running flash(soldered=1 socket=0)=1,BIOScase:4,BIOSv24:0,verrou=1,algoNOR=1,size=4,base=FFE00000 Bios case 4 *** CPU7-2 Board version 3BA23259ABJE06’’ *** *** CPU7-2 Layout 1 *** *** BIOS Version 3BA24115AACC bscpu7300/003.002 *** *** Generated on Jan/16/2007 at 11:08 *** *** Celeron @ 648 *** CMOS is available PCI command read for natsemi : 347 PCI Master Bit Setting... pci_command set to: 357 0:80:9F:9D:FB:A8 9D , IRQ 12. eth0: Transceiver status 0x 7869 advertising 5E1 Hard Disk #0 : Hitachi HTE543225A7A384 131071 Mo Parameters : Type 3 Extended Type 255 Sectors / track 63 Landing Zone 0 Control Byte 0 Write Precomp 0 Heads 16 Nb of Cylinders 16383 HD size(cyl*sec by track*head*sector size) 8455 MO(decimal) time :sec=27,min=54,hour= 9,DoW= 4,date=17,Month=11,year=20 time :sec=32,min=54,hour= 9,DoW= 4,date=17,Month=11,year=20 CPU7 informations : Memory Detected : 262144 Ko Flash Not Detected DaughterBoard Not Detected XILINX Detected XILINX Chip Initialization OK Ethernet Found : 1 Ethernet Chip Initialization OK Hard Disk Detected Hard Disk Found : 1 check lock RTC unlock RTC forced IO2 absent it floppy received FDTest= 660740 value of DIL switch forced CPU7 2 USB Base address is FC21 No HD trace YOU CAN strike Ctrl B to enter in BIOS monitor during several seconds fr om NOW ! shut ok Boot from hard disk #0 Watchdog started with 3 min valeur index DXCX = FF01FEFF GRUB Error : Unknown CPU 0x27 : stop_watch_dog valeur index DXCX = FF01FEFF no switch back. GRUB version 0.5.96 (896K lower / 261120K upper memory) Press enter to boot the default OS [0], 'c' for a command-line, or give an another entry number [0]: Boot GNU/Linux [default] [1]: Install GRUB into the hard disk the default entry [0] will be booted automatically in 1 seconds. Booting 'Boot GNU/Linux [default]' root (hd0,4) valeur index DXCX = FF01FEFF kernel /boot/vmlinuz root=/dev/hda5 console=ttyS0,9600 panic=5 valeur index DXCX = FF01FEFF [Linux-bzImage, setup=0xa00, size=0x9ba49] CPU27: Added 2 region for memory map Bootinfo src = 0x7ff000 Bootinfo dst = 0xc0105000 Linux version 2.4.17-ll-dhs3 [026.008] (infrafoxc@INCHNAL01) (gcc version 2.95.3 20010315 (release)) #2 Wed Jan 9 17:49:33 IST 2013 Alcatel Architecture Setup Booting Alcatel-Lucent CPU 7s2 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000e0000 (usable) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) BIOS-e820: 0000000000000000 - 00000000000e0000 (usable) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) final contents of e820: 0000000000000000 - 00000000000e0000 (usable) final contents of e820: 0000000000100000 - 0000000010000000 (usable) On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. VGA not validated Kernel command line: root=/dev/hda5 console=ttyS0,9600 panic=5 bipa=0x7ff000 Initializing CPU#0 Detected 647.730 MHz processor. Calibrating delay loop... 1291.05 BogoMIPS Memory: 256396k/262144k available (948k kernel code, 5620k reserved, 261k data, 64k init, 0k highmem) Cpu type: CPU7s2 Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Mobile Intel(R) Celeron(TM) CPU 650MHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd ACPI: Not supported on this hardware, exiting pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A ttyS02 at 0x83e8 (irq = 9) is a 16450 ttyS03 at 0x82e8 (irq = 9) is a 16450 block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PIIX4: chipset revision 5 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio hda: Hitachi HTE543225A7A384, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: 268435455 sectors (137439 MB) w/8192KiB Cache, CHS=266305/16/63, UDMA(33) Partition check: hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 hda16 hda17 > NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. 802.1Q VLAN Support v1.6 Ben Greear <greearb@candelatech.com> vlan Initialization complete. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 64k freed INIT: version 2.78 booting Welcome to Linux Mandrake Press 'I' to enter interactive startup. Mounting proc filesystem [ OK ] Configuring kernel parameters: [ OK ] Activating swap partitions: [ OK ] Setting hostname uvd_co.oxe: [ OK ] Checking root filesystem DHS3ROOT was not cleanly unmounted, check forced. DHS3ROOT: Inode 97454, i_blocks is 64, should be 8. FIXED. DHS3ROOT: 16236/128256 files (0.1% non-contiguous), 27487/256024 blocks [PASSED] Remounting root filesystem in read-write mode: [ OK ] Finding module dependencies /etc/rc.sysinit(1): Finding module dependencies [ OK ] Checking filesystems DHS3ROOT2: clean, 11/128256 files, 4039/256024 blocks /etc/rc.sysinit(1): Checking filesystems [ OK ] Checking filesystems DHS3BIN was not cleanly unmounted, check forced. DHS3BIN: 1647/128256 files (2.8% non-contiguous), 114140/256024 blocks /etc/rc.sysinit(1): Checking filesystems [PASSED] Checking filesystems DHS3DATA was not cleanly unmounted, check forced. DHS3DATA: 3680/128256 files (1.2% non-contiguous), 40169/256024 blocks /etc/rc.sysinit(1): Checking filesystems [PASSED] Checking filesystems DHS3DYN was not cleanly unmounted, check forced. DHS3DYN: Inode 272546, i_blocks is 64, should be 8. FIXED. DHS3DYN: Inode 272553, i_blocks is 64, should be 8. FIXED. DHS3DYN: Inode 272623, i_blocks is 64, should be 8. FIXED. DHS3DYN: Inode 272624, i_blocks is 64, should be 8. FIXED. DHS3DYN: Inode 272625, i_blocks is 64, should be 8. FIXED. DHS3DYN: Inode 272598, i_blocks is 496, should be 456. FIXED. DHS3DYN: Inode 288579, i_blocks is 336, should be 328. FIXED. DHS3DYN: Inode 288631, i_blocks is 288, should be 272. FIXED. DHS3DYN: Inode 384786, i_blocks is 64, should be 8. FIXED. DHS3DYN: Inode 416835, i_blocks is 64, should be 8. FIXED. DHS3DYN: 502/641280 files (3.2% non-contiguous), 35775/1280026 blocks /etc/rc.sysinit(1): Checking filesystems [PASSED] Checking filesystems DHS3BIN2: clean, 11/128256 files, 4039/256024 blocks /etc/rc.sysinit(1): Checking filesystems [ OK ] Checking filesystems DHS3DATA2: clean, 11/128256 files, 4039/256024 blocks /etc/rc.sysinit(1): Checking filesystems [ OK ] Checking filesystems DHS3EXT was not cleanly unmounted, check forced. DHS3EXT: 118/641280 files (0.0% non-contiguous), 31667/1280026 blocks /etc/rc.sysinit(1): Checking filesystems [PASSED] Checking filesystems DHS3VAR was not cleanly unmounted, check forced. DHS3VAR: Inode 16445, i_blocks is 64, should be 8. FIXED. DHS3VAR: Inode 16419, i_blocks is 952, should be 896. FIXED. DHS3VAR: Inode 49251, i_blocks is 936, should be 880. FIXED. DHS3VAR: Inode 49252, i_blocks is 792, should be 744. FIXED. DHS3VAR: Inode 114923, i_blocks is 64, should be 8. FIXED. DHS3VAR: Inode 114928, i_blocks is 64, should be 8. FIXED. DHS3VAR: Inode 114915, i_blocks is 792, should be 744. FIXED. DHS3VAR: Inode 131339, i_blocks is 544, should be 520. FIXED. DHS3VAR: Inode 131349, i_blocks is 728, should be 680. FIXED. DHS3VAR: Inode 131372, i_blocks is 352, should be 328. FIXED. DHS3VAR: 184/196992 files (15.8% non-contiguous), 8041/393216 blocks /etc/rc.sysinit(1): Checking filesystems [PASSED] Checking filesystems DHS3VAR2: clean, 11/196992 files, 6197/393216 blocks /etc/rc.sysinit(1): Checking filesystems [ OK ] Mounting local filesystems /etc/rc.sysinit(1): Mounting local filesystems [ OK ] Checking loopback filesystems /etc/rc.sysinit(1): Checking loopback filesystems [ OK ] Mounting loopback filesystems: /etc/rc.sysinit(1): Mounting loopback filesystems: [ OK ] Setting clock (utc): Tue Nov 17 10:55:12 CET 2020 Tue Nov 17 10:55:12 CET 2020 /etc/rc.sysinit(1): Setting clock (utc): Tue Nov 17 10:55:12 CET 2020 [ OK ] Enabling swap space: /etc/rc.sysinit(1): Enabling swap space: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Clock is set at (utc): Tue Nov 17 10:55:15 CET 2020 Tue Nov 17 10:55:15 CET 2020 /etc/rc3.d/S01hwclock(1): Clock is set at (utc): Tue Nov 17 10:55:15 CET 2020 [ OK ] Starting dhs3mod: Loading Alcatel-Lucent specific modules: /etc/rc3.d/S02dhs3mod(1): dhs3mod startup [ OK ] /etc/rc.d/rc(1): Starting dhs3mod: [ OK ] Starting eva: Loading Alcatel-Lucent EVA modules: /etc/rc3.d/S02eva(1): eva startup [ OK ] /etc/rc.d/rc(1): Starting eva: [ OK ] Starting kdebug services: new debug mode: dump /etc/rc3.d/S02kdebug(1): Starting kdebug services: [ OK ] Starting throttled services: /etc/rc3.d/S02throttled(1): throttled startup [ OK ] Starting watchdog: Starting watchdog services: /etc/rc.d/rc(1): Starting watchdog: [ OK ] Remove not allowed accounts: /etc/rc3.d/S09security(1): Remove not allowed accounts: [ OK ] Setting network parameters: /etc/rc3.d/S10network(1): Setting network parameters: [ OK ] Bringing up interface lo: /etc/rc3.d/S10network(1): Bringing up interface lo: [ OK ] Enabling IPv4 packet forwarding /etc/rc3.d/S10network(1): Enabling IPv4 packet forwarding [ OK ] Bringing up interface eth0: /etc/rc3.d/S10network(1): Bringing up interface eth0: [ OK ] Starting netadmin: /etc/rc.d/rc(1): Starting netadmin: [ OK ] Starting netadmind: /etc/rc.d/rc(1): Starting netadmind: [ OK ] Starting sysstat: Starting ... Started (pid=539). /etc/rc.d/rc(1): Starting sysstat: [ OK ] Initializing random number generator: /etc/rc3.d/S20random(1): Initializing random number generator: [ OK ] Starting gwlinuxfifo: Creation de la fifo: /etc/rc.d/rc(1): Starting gwlinuxfifo: [ OK ] Starting system logger: /etc/rc3.d/S30syslog(1): syslogd startup [ OK ] Starting kernel logger: /etc/rc3.d/S30syslog(1): klogd startup [ OK ] Starting dhslog: Loading Alcatel-Lucent specific log functionality: /etc/rc3.d/S31dhslog(1): dhslog startup [ OK ] /etc/rc.d/rc(1): Starting dhslog: [ OK ] Starting flashbios: Current bios backup in progress... Current bios release : bscpu7300/003.002 Bios to flash release: bscpu7300/003.002 Flashing operation is not needed /etc/rc.d/rc(1): Starting flashbios: [ OK ] Starting at daemon: /etc/rc3.d/S40atd(1): atd startup [ OK ] Starting xinetd: /etc/rc3.d/S56xinetd(1): xinetd startup [ OK ] Starting keytable: /etc/rc.d/rc(1): Starting keytable: [ OK ] Starting crond: /etc/rc3.d/S90crond(1): crond startup [ OK ] Starting kheader: /etc/rc.d/rc(1): Starting kheader: [ OK ] Loading chorus/mix emulation layer:/etc/rc3.d/S98emulation(1): S98emulation [ OK ] automatic start of dhs3 is about to begin waiting 5 seconds before starting ... type CR key to stop Too late. Automatic start of dhs3 is in progress Starting the TEL applications: /etc/rc3.d/S99tel(1): S99tel [ OK ] Alcatel-Lucent OmniPCX Enterprise uvd_co.oxe login: Building Menus, Please Wait \ MOVE RACK 19 already done => Nothing to do Bye Bye Remanent loading ... /..........17/11/20 10:56:40 000001I|---/--/-/---|=4:2199=A4400 Version : R10.1.1-j2.603-20-i-ru-c7s2 ..17/11/20 10:56:40 000001I|---/--/-/---|=2:1006=DPNSS Prefix Missing, No DPNSS prefix added. ...................17/11/20 10:56:41 000001I|---/--/-/---|=2:4351=Incoherent data: appli INITREM table NETNODE cause 19 info -1 -1 -1 ......../ Actor MONITELmod started, pid=995 Black box recording started... Traces Analyser activated mtracer started ... (001633:000001) MTRACER ’, version: R10.1.1-j2.603-20-i-ru-c7s2 (001633:000001) MTRACER num: 001, time: 2020/11/17 10:57:28, loss: 0% 17/11/20 10:57:29 000001I|---/--/-/---|=2:2176=A dynamic patch has been installed for TEL (001668:000002) Detect CPU:CPU7 (H) Thread Lim it=150 ms 17/11/20 10:57:48 000001I|---/--/-/---|=2:2176x004=A dynamic patch has been installed for TEL 17/11/20 10:57:48 000001I|---/--/-/---|=4:0260=Beginning of downlActor MON25mod started, pid=1075 oading binloaderio1n 17/11/20 10:57:48 000001I|---/--/-/---|=5:0261=End of downloading binloaderio1n (001834:000003) monix_actor add 0xd18252c0:3514979008 Value 659456 (001835:000004) ** x25 started ** 0 (001835:000005) IPLINK initialize -> 70000000 lancement de dis25 (001932:000006) (001932:000007) --------------- Network Builder E1 1.0 12-15-01 ---------------- (001932:000008) Start Remanents Packet Handler : 0000 (001932:000009) Packet Handler Total Remanents : 000000 Ko (001932:000010) Packet Handler Dynamiques Remanents : 001151 Ko (001932:000011) Current Pointeur : 00001296 o (001932:000012) Stop Pointeur : 01179647 o (001932:000013) Free Packet Handler Remanents : 01178351 o (001932:000014) FreeMemory : 119808 Ko (001932:000015) LockMemory : 001285 Mo (001932:000016) TotalMemory : 000250 Mo (001932:000017) ~~ threadAbcfIpTransmit running (001932:000018) ~~ threadAbcfIpRetransmit running (001937:000019) mutex release on dis25 exception Tue Nov 17 10:58:13 CET 2020 Tue Nov 17 10:58:23 CET 2020 17/11/20 10:58:23 000001I|000/28/-/---|=4:0260=Beginning of downloading binio1n (002232:000020) mutex release on dis25 exception 17/11/20 10:58:32 000001I|000/28/-/---|=5:0261=End of downloading binio1n 17/11/20 10:58:32 000001I|000/28/-/---|=4:0260=Beginning of downloading tonesnv 17/11/20 10:58:32 000001I|000/28/-/---|=5:0261=End oioctl cmd UART_ON f downloading tonesnv 17/11/20 10:58:32 000001M|---/--/-/---|=5:2009=Initialisation CPU role MAIN (002278:000021) dl_id 8 appli_cap.ui 794624 (002278:000022) dl_id 34 appli_cap.ui 794624 (002278:000023) dl_id 83 appli_cap.ui 794624 (002278:000024) dl_id 84 appli_cap.ui 794624 (002278:000025) dl_id 94 appli_cap.ui 794624 17/11/20 10:58:32 000001M|019/01/-/---|=5:2019=INTIPA coupler commissioning 17/11/20 10:58:33 000001M|000/28/-/---|=4:0260=Beginning of downloading bnvdsp0cpu6 17/11/20 10:58:34 000001M|000/28/-/---|=5:0261=End of downloading bnvdsp0cpu6 INIT: Warning: Application "NTPD" will be restarted 17/11/20 10:58:35 000001M|000/22/-/---|=4:0260=Beginning of downloading tonesnv_r2 17/11/20 10:58:35 000001M|000/22/-/---|=5:0261=End of downloading tonesnv_r2 17/11/20 10:58:35 000001M|000/22/-/---|=4:0260=Beginning of downloading bnvdsp1gpa2 (002323:000026) Illegal coupler-type 0 (002323:000027) Dump: .06.03.0d.00.02.03.00.06.04.fe.f9.00.14 (002323:000028) Unknown physical terminal (002323:000029) Dump: .06.03.0d.00.02.03.00.06.04.fe.f9.00.14 17/11/20 10:58:37 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,6,254) 17/11/20 10:58:37 000001M|---/--/-/---|=3:1607=06.03.0d.00.03.03.00.06.04.fe.f9.00.14.ff.ff 17/11/20 10:58:37 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,6,254) 17/11/20 10:58:37 000001M|---/--/-/---|=3:1607=06.03.0d.00.03.03.00.06.04.fe.f9.00.14.ff.ff (002323:000030) Illegal coupler-type 0 (002323:000031) Dump: .10.03.0d.00.02.03.00.10.04.fe.f9.00.14 (002323:000032) Unknown physical terminal (002323:000033) Dump: .10.03.0d.00.02.03.00.10.04.fe.f9.00.14 17/11/20 10:58:37 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,16,254) 17/11/20 10:58:37 000001M|---/--/-/---|=3:1607=10.03.0d.00.03.03.00.10.04.fe.f9.00.14.ff.ff 17/11/20 10:58:37 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,16,254) 17/11/20 10:58:37 000001M|---/--/-/---|=3:1607=10.03.0d.00.03.03.00.10.04.fe.f9.00.14.ff.ff (002323:000034) Illegal coupler-type 0 (002323:000035) Dump: .13.03.0d.00.02.03.00.13.04.fe.f9.00.14 (002323:000036) Unknown physical terminal (002323:000037) Dump: .13.03.0d.00.02.03.00.13.04.fe.f9.00.14 17/11/20 10:58:37 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,19,254) 17/11/20 10:58:37 000001M|---/--/-/---|=3:1607=13.03.0d.00.03.03.00.13.04.fe.f9.00.14.ff.ff 17/11/20 10:58:37 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,19,254) 17/11/20 10:58:37 000001M|---/--/-/---|=3:1607=13.03.0d.00.03.03.00.13.04.fe.f9.00.14.ff.ff IOREVEIL Start IOREVEIL Init 17/11/20 10:58:45 000001M|000/22/-/---|=5:0261=End of downloading bnvdsp1gpa2 17/11/20 10:58:45 000001M|000/22/-/---|=4:0260=Beginning of downloading bnvdsp2gpa2 DATE: 11/17/20 TIME: 10:58:52 sip: Ethernet link is used for copy sip: role is not standby, no registrar copy 17/11/20 10:59:00 000001M|000/22/-/---|=5:0261=End of downloading bnvdsp2gpa2 Command "REGISTRAR" (pid 1372) exited with status 6. 17/11/20 10:59:04 000001M|000/15/-/---|=5:2019=NPRAE coupler commissioning (002844:000038) Illegal coupler-type 0 (002844:000039) Dump: .06.03.0d.00.02.03.00.06.04.fe.f9.00.14 (002844:000040) Unknown physical terminal (002844:000041) Dump: .06.03.0d.00.02.03.00.06.04.fe.f9.00.14 17/11/20 10:59:29 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,6,254) 17/11/20 10:59:29 000001M|---/--/-/---|=3:1607=06.03.0d.00.03.03.00.06.04.fe.f9.00.14.ff.ff 17/11/20 10:59:29 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,6,254) 17/11/20 10:59:29 000001M|---/--/-/---|=3:1607=06.03.0d.00.03.03.00.06.04.fe.f9.00.14.ff.ff (002844:000042) Illegal coupler-type 0 (002844:000043) Dump: .10.03.0d.00.02.03.00.10.04.fe.f9.00.14 (002844:000044) Unknown physical terminal (002844:000045) Dump: .10.03.0d.00.02.03.00.10.04.fe.f9.00.14 17/11/20 10:59:29 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,16,254) 17/11/20 10:59:29 000001M|---/--/-/---|=3:1607=10.03.0d.00.03.03.00.10.04.fe.f9.00.14.ff.ff 17/11/20 10:59:29 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,16,254) 17/11/20 10:59:29 000001M|---/--/-/---|=3:1607=10.03.0d.00.03.03.00.10.04.fe.f9.00.14.ff.ff (002844:000046) Illegal coupler-type 0 (002844:000047) Dump: .13.03.0d.00.02.03.00.13.04.fe.f9.00.14 (002844:000048) Unknown physical terminal (002844:000049) Dump: .13.03.0d.00.02.03.00.13.04.fe.f9.00.14 17/11/20 10:59:29 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,19,254) 17/11/20 10:59:29 000001M|---/--/-/---|=3:1607=13.03.0d.00.03.03.00.13.04.fe.f9.00.14.ff.ff 17/11/20 10:59:29 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,19,254) 17/11/20 10:59:29 000001M|---/--/-/---|=3:1607=13.03.0d.00.03.03.00.13.04.fe.f9.00.14.ff.ff 17/11/20 10:59:34 000001M|000/22/-/---|=5:2019=GPA coupler commissioning Tue Nov 17 10:59:37 CET 2020 Cyclical test of couplers : --------------------------- |--------------------------| | CRYSTAL | STATE | PERIOD | | 000 | ON | 3 | | 001 | ON | 10 | | 002 | ON | 10 | | 003 | ON | 10 | | 004 | ON | 10 | | 005 | ON | 10 | | 006 | ON | 10 | | 007 | ON | 10 | | 008 | ON | 10 | | 009 | ON | 10 | | 010 | ON | 10 | | 011 | ON | 10 | | 012 | ON | 10 | | 013 | ON | 10 | | 014 | ON | 10 | | 015 | ON | 10 | | 016 | ON | 10 | | 017 | ON | 10 | | 018 | ON | 10 | | 019 | ON | 10 | |--------------------------| RespTimeOut : 5 sec. InitialWait : 30 sec. NbFaultAccepted : 1 17/11/20 10:59:45 000001M|000/17/-/---|=5:2019=UA coupler commissioning Tue Nov 17 10:59:47 CET 2020 Cyclical test of auxilaries : ----------------------------- Test active Periode : 180 sec. RespTimeOut : 10 sec. InitialWait : 30 sec. 17/11/20 10:59:48 000001M|000/24/-/---|=5:2019=UA coupler commissioning Tue Nov 17 10:59:57 CET 2020 Maintenance of DECT base stations is already active open file /DHS3bin/mtcl/mtcl.cron open file /DHS3bin/oneshot/mtcl/business.cron read usr crontab (003365:000050) Illegal coupler-type 0 (003365:000051) Dump: .06.03.0d.00.02.03.00.06.04.fe.f9.00.14 (003365:000052) Unknown physical terminal (003365:000053) Dump: .06.03.0d.00.02.03.00.06.04.fe.f9.00.14 17/11/20 11:00:21 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,6,254) 17/11/20 11:00:21 000001M|---/--/-/---|=3:1607=06.03.0d.00.03.03.00.06.04.fe.f9.00.14.ff.ff 17/11/20 11:00:21 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,6,254) 17/11/20 11:00:21 000001M|---/--/-/---|=3:1607=06.03.0d.00.03.03.00.06.04.fe.f9.00.14.ff.ff (003365:000054) Illegal coupler-type 0 (003365:000055) Dump: .10.03.0d.00.02.03.00.10.04.fe.f9.00.14 (003365:000056) Unknown physical terminal (003365:000057) Dump: .10.03.0d.00.02.03.00.10.04.fe.f9.00.14 17/11/20 11:00:21 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,16,254) 17/11/20 11:00:21 000001M|---/--/-/---|=3:1607=10.03.0d.00.03.03.00.10.04.fe.f9.00.14.ff.ff 17/11/20 11:00:21 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,16,254) 17/11/20 11:00:21 000001M|---/--/-/---|=3:1607=10.03.0d.00.03.03.00.10.04.fe.f9.00.14.ff.ff (003365:000058) Illegal coupler-type 0 (003365:000059) Dump: .13.03.0d.00.02.03.00.13.04.fe.f9.00.14 (003365:000060) Unknown physical terminal (003365:000061) Dump: .13.03.0d.00.02.03.00.13.04.fe.f9.00.14 17/11/20 11:00:21 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,19,254) 17/11/20 11:00:21 000001M|---/--/-/---|=3:1607=13.03.0d.00.03.03.00.13.04.fe.f9.00.14.ff.ff 17/11/20 11:00:21 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,19,254) 17/11/20 11:00:21 000001M|---/--/-/---|=3:1607=13.03.0d.00.03.03.00.13.04.fe.f9.00.14.ff.ff open file /DHS3data/incid/incid.cron read usr crontab rm: cannot remove `/DHS3dyn/tmp/serviceab.lock': No such file or directory Command "GETNOEVERSION" (pid 1428) exited with status 1. SYSTEME NON CONFORME POUR LE TRAITEMENT DES ADJONCTIONS System not consistent to handle properly adjunctions VEUILLEZ Y REMEDIER EN UTILISANT LA RUBRIQUE 'Restore OPS' DE SWINST Please correct this by using the item 'Restore OPS' of swinst menus test_ops: ERROR Can't find any *.zip files in /DHS3data/mao Command "TEST_OPS" (pid 1442) exited with status 1. No problem with compatibilities (003886:000062) Illegal coupler-type 0 (003886:000063) Dump: .06.03.0d.00.02.03.00.06.04.fe.f9.00.14 (003886:000064) Unknown physical terminal (003886:000065) Dump: .06.03.0d.00.02.03.00.06.04.fe.f9.00.14 17/11/20 11:01:13 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,6,254) 17/11/20 11:01:13 000001M|---/--/-/---|=3:1607=06.03.0d.00.03.03.00.06.04.fe.f9.00.14.ff.ff 17/11/20 11:01:13 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,6,254) 17/11/20 11:01:13 000001M|---/--/-/---|=3:1607=06.03.0d.00.03.03.00.06.04.fe.f9.00.14.ff.ff (003886:000066) Illegal coupler-type 0 (003886:000067) Dump: .10.03.0d.00.02.03.00.10.04.fe.f9.00.14 (003886:000068) Unknown physical terminal (003886:000069) Dump: .10.03.0d.00.02.03.00.10.04.fe.f9.00.14 17/11/20 11:01:13 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,16,254) 17/11/20 11:01:13 000001M|---/--/-/---|=3:1607=10.03.0d.00.03.03.00.10.04.fe.f9.00.14.ff.ff 17/11/20 11:01:13 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,16,254) 17/11/20 11:01:13 000001M|---/--/-/---|=3:1607=10.03.0d.00.03.03.00.10.04.fe.f9.00.14.ff.ff (003886:000070) Illegal coupler-type 0 (003886:000071) Dump: .13.03.0d.00.02.03.00.13.04.fe.f9.00.14 (003886:000072) Unknown physical terminal (003886:000073) Dump: .13.03.0d.00.02.03.00.13.04.fe.f9.00.14 17/11/20 11:01:13 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,19,254) 17/11/20 11:01:13 000001M|---/--/-/---|=3:1607=13.03.0d.00.03.03.00.13.04.fe.f9.00.14.ff.ff 17/11/20 11:01:13 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,19,254) 17/11/20 11:01:13 000001M|---/--/-/---|=3:1607=13.03.0d.00.03.03.00.13.04.fe.f9.00.14.ff.ff CPU7 detected Tue Nov 17 11:01:47 CET 2020 (004406:000074) Illegal coupler-type 0 (004406:000075) Dump: .06.03.0d.00.02.03.00.06.04.fe.f9.00.14 (004406:000076) Unknown physical terminal (004406:000077) Dump: .06.03.0d.00.02.03.00.06.04.fe.f9.00.14 17/11/20 11:02:05 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,6,254) 17/11/20 11:02:05 000001M|---/--/-/---|=3:1607=06.03.0d.00.03.03.00.06.04.fe.f9.00.14.ff.ff 17/11/20 11:02:05 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,6,254) 17/11/20 11:02:05 000001M|---/--/-/---|=3:1607=06.03.0d.00.03.03.00.06.04.fe.f9.00.14.ff.ff (004406:000078) Illegal coupler-type 0 (004406:000079) Dump: .10.03.0d.00.02.03.00.10.04.fe.f9.00.14 (004406:000080) Unknown physical terminal (004406:000081) Dump: .10.03.0d.00.02.03.00.10.04.fe.f9.00.14 17/11/20 11:02:05 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,16,254) 17/11/20 11:02:05 000001M|---/--/-/---|=3:1607=10.03.0d.00.03.03.00.10.04.fe.f9.00.14.ff.ff 17/11/20 11:02:05 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,16,254) 17/11/20 11:02:05 000001M|---/--/-/---|=3:1607=10.03.0d.00.03.03.00.10.04.fe.f9.00.14.ff.ff (004406:000082) Illegal coupler-type 0 (004406:000083) Dump: .13.03.0d.00.02.03.00.13.04.fe.f9.00.14 (004406:000084) Unknown physical terminal (004406:000085) Dump: .13.03.0d.00.02.03.00.13.04.fe.f9.00.14 17/11/20 11:02:05 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,19,254) 17/11/20 11:02:05 000001M|---/--/-/---|=3:1607=13.03.0d.00.03.03.00.13.04.fe.f9.00.14.ff.ff 17/11/20 11:02:05 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,19,254) 17/11/20 11:02:05 000001M|---/--/-/---|=3:1607=13.03.0d.00.03.03.00.13.04.fe.f9.00.14.ff.ff (004927:000086) Illegal coupler-type 0 (004927:000087) Dump: .06.03.0d.00.02.03.00.06.04.fe.f9.00.14 (004927:000088) Unknown physical terminal (004927:000089) Dump: .06.03.0d.00.02.03.00.06.04.fe.f9.00.14 17/11/20 11:02:57 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,6,254) 17/11/20 11:02:57 000001M|---/--/-/---|=3:1607=06.03.0d.00.03.03.00.06.04.fe.f9.00.14.ff.ff 17/11/20 11:02:57 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,6,254) 17/11/20 11:02:57 000001M|---/--/-/---|=3:1607=06.03.0d.00.03.03.00.06.04.fe.f9.00.14.ff.ff (004927:000090) Illegal coupler-type 0 (004927:000091) Dump: .10.03.0d.00.02.03.00.10.04.fe.f9.00.14 (004927:000092) Unknown physical terminal (004927:000093) Dump: .10.03.0d.00.02.03.00.10.04.fe.f9.00.14 17/11/20 11:02:57 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,16,254) 17/11/20 11:02:57 000001M|---/--/-/---|=3:1607=10.03.0d.00.03.03.00.10.04.fe.f9.00.14.ff.ff 17/11/20 11:02:57 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,16,254) 17/11/20 11:02:57 000001M|---/--/-/---|=3:1607=10.03.0d.00.03.03.00.10.04.fe.f9.00.14.ff.ff (004927:000094) Illegal coupler-type 0 (004927:000095) Dump: .13.03.0d.00.02.03.00.13.04.fe.f9.00.14 (004927:000096) Unknown physical terminal (004927:000097) Dump: .13.03.0d.00.02.03.00.13.04.fe.f9.00.14 17/11/20 11:02:57 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 1451, position (0,19,254) 17/11/20 11:02:57 000001M|---/--/-/---|=3:1607=13.03.0d.00.03.03.00.13.04.fe.f9.00.14.ff.ff 17/11/20 11:02:57 000001M|---/--/-/---|=0:1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,19,254) 17/11/20 11:02:57 000001M|---/--/-/---|=3:1607=13.03.0d.00.03.03.00.13.04.fe.f9.00.14.ff.ff |
Последние 3 строки повторяются бесконечно (там где про 6, 16, 19 порты) в этих портах стоят eZ32-2.
Мне подсказали,что система хочет, чтобы я ввел логин, но ни на каком этапе ничего ввести не удается (не печатается). Даже тут:
Код |
---|
Alcatel-Lucent OmniPCX Enterprise uvd_co.oxe login: |
Изменено: Олег Хатеев - 17.11.2020 13:21:40